Slurry pump installation steps

August 22, 2023

Slurry pump installation steps:
1. Check the installation of the slurry pump mechanical seal model, the specifications are correct.
2. Check the size of the parts associated with the installation of the mechanical seal and mechanical seal accuracy, geometric accuracy and correlation with the technical requirements.
(1) Allowable radial runout of the shaft (or sleeve) where the mechanical seal is installed, surface finish of the shaft (or sleeve), and tolerance of outside diameter dimensions.
(2) seal cavity and gland positioning end face of the shaft (or sleeve) centerline vertical tolerance tolerance.
(3) The end of the shaft (or sleeve) on which the moving ring seal is mounted, and the chamfer and finish of the end structure of the housing bore for the mechanical seal.
(4) The axial displacement of the mechanical seal shaft when working.
3. During the installation of the slurry pump, keep it clean and do not allow the tool to beat the sealing element to prevent damage and damage.
4 installation, moving, static ring surface should be coated with a layer of clean oil and turbine oil. Auxiliary seals (including moving ring seals and static ring seals) are also to be applied with a clean layer of engine oil or turbine oil before installation to ensure smooth installation.
5. The static ring seal set in the back of the static ring, into the sealed end cap, pay attention not to hurt the static end face, to ensure that the static end face and cover the centerline vertical, and pay attention to the back of the static ring to prevent trough to Alignment anti-sales, but can not touch.
6. Rotating part of the mechanical seal, relying on the two fixed screws on the spring seat and the shaft fixed, tighten the screws, to ensure the working length of the spring.

Contáctenos

Author:

Ms. Gia Zuo

Correo electrónico:

sales4@zjslurrypump.com

Phone/WhatsApp:

+86 15511357509

productos populares

Noticias

Equipo de producción de bomba de suspensión-línea de productos automático

October 19, 2023

Las partes principales de una bomba centrífuga

September 27, 2023

Noticias del sector

Se introduce el principio de funcionamiento de la bomba de la lechada

June 26, 2023

Bomba de suspensión ZJ Entorno aplicable

June 14, 2023

Blog News

What is the characteristics of slurry pump, slurry pump What?

May 15, 2024

Slurry pump seal for centrifugal seal and expeller seal

March 01, 2024

You may also like

Related Categories

Contactar proveedor

Asunto:

Email:

Mensaje:

Your message must be betwwen 20-8000 characters